Our anti-slip tile treatment is rated among the best in Australia!Pricing:
Best Product on the Market
Tailored to Suit Your Tiles
No Down Time
Unlike a DIY anti-slip tile treatment that may peel off or discolour, our trained team use a highly specialised product that will not change the appearance of the tiles.
We pride ourselves in the quality of product and service that we provide. In fact, we have the only solution on the market for dark tiles! Unlike any of our competitors, who leave darker tiles destroyed once they have applied their anti-slip treatment, we leave your tiles looking great as they should.
After the application of the treatment, your tiles will have grip and will be up to standard.
Absolutely! Before we start the project, a treatment will be applied to a small inconspicuous area or a spare tile if you have one. By doing this, you will have peace of mind.
Unlike our competitors, we tailor the treatment to suit your tiles. All tiles are different and require a different approach. We will make sure to have the perfect formula for your tiles.
As mentioned before, every tile is different and every job has its own unique formula. However, our anti-slip treatment applies incredibly fast and is ready for use straight away. For example, when we apply our anti-slip tile treatment to a shower floor the following takes place:
1 Initial testing of your tile is to figure out the best formula for your anti-slip tile treatment. In most cases, you would have to meet Australian standards. This process takes approximately 30 minutes.
2 After both parties, i.e. you the customer and us, are happy with how the outcome, we will go ahead and do the treatment, approximately 45 minutes.
The entire process for our anti-slip treatment, from beginning to end, is less than 1.5 hours for a typical anti-slip tile treatment of a shower or small bathroom.
For larger jobs, our anti-slip treatment process is similar to above. Depending on our treatment formulation for your tiles and environmental conditions, we can typically treat between 50m-100 square meters per hour. However, we have a well trained and fully equipped team to ramp up those figures where jobs are more time-sensitive, e.g. a shopping centre that can only be done out of hours.
Anti-slip tile treatment procedure:
First, We test the tile to determine the number of applications needed to achieve Australian Standards.
This is done by treating a sample area of the tile with different formulas to see which formula works best for your specific tile.
We want the best result for our customers and we will get your approval before starting on any project
Once testing is completed, the tiles are thoroughly cleaned with our unique formula to enhance the effectiveness of the treatment.
This ensures that tiles look great once we have finished the treatment. It also ensures that the formulation we work with covers the entire area of the tiles and that every square inch is non slip.
3. The formula, which is uniquely tailored to suit your tile, is then applied to the tiles.
This is where the magic happens.
With the correct formulation figured out in step one, the product then dwells on the tile according to the time needed for that formula to work best.
Once the product has created the micro tread on the surface, its time to neutralise.
We apply our unique product to finish off the process and bring the tile back to a neutral PH.
This step is important in order to keep the tile from over reacting to the treatment.
Lastly, your tiles are washed and the site is cleaned and dried up.
We make sure that everything is left perfectly clean and ready to use.